Our premium wall mounted rigs are extremely well manufactured. These are highly adjustable with modular hole pattern meaning these can be turned into rigs or racks, joined to other rigs in various ways, storage horns can be added and lots of other options due to the construction of the hole pattern.
Our j hooks and spotter bars also have a nylon coating on the face to protect your barbells from getting damaged against the constant beating they take from re racking every time. This also means the J hooks and spotters also look as good as new months or even years after constant abuse compared to conventional powder coated j hooks as powder coating will chip over time.
- Rigs are 500mm/50cm from the wall but we also have 1.0m/100cm long connectors to the wall
- Made using 75mm x 75mm x 3mm box steel
- Height 2440mm
- Numbered hole identification
- Protected j hooks
- Tough coat powdercoat paint for grip and protection
- Modular hole pattern
- J hooks tested to a minimum of 300kg
Pull up bar 1m wide
Connecting bar between rigs with 2 or more bays are 1.8m long
Bars connecting to the wall are 1 metre long
1 bay – 1.2m wide , 500mm/50cm depth from wall, 2.44m high
2 bay – 4.2m wide , 500mm/50cm depth from wall 2.44m high
3 bay – 7.31m wide , 500mm/50cm depth from wall 2.44m high
4 bay – 10.2m wide, 500mm/50cm depth from wall 2.44m high
Unlimited bays available on request
For those with a small height of wall, the lowest point for the connector bar to the wall is 1940mm from the floor to the centre of the connector bar but there are various heights above that. Completely adjustable
CUSTOM COLOURS NOW AVAILABLE FOR SMALL CHARGE, OTHER CUSTOM OPTIONS ALSO AVAILABLE AS WE HAVE FULLY OPERATIONAL WORKSHOP ON SITE FOR DESIGN & MANUFACTURING
CUSTOM CONNECTOR BARS AVAILABLE TO YOUR SPECIFIC LENGTH ON REQUEST
LOTS OF ATTACHMENTS FOR OUR RIGS INCLUDING DIP BARS, LANDMINE ATTACHMENTS, WALL BALL TARGETS AND SPOTTERS BARS.
ALL SPOTTER BARS, DIP BARS, LANDMINE ATTACHMENTS AND WALL BALL TARGETS IN OUR WEBSITE FIT THESE RIGS
